MEXC is cheaper for BTC perpetuals opened with limit orders: its BTCUSDT rate is 0% maker and 0.02% taker against BloFin's 0.02% and 0.06%, so a 25,000 USDT position costs 5 USDT, not 20.
BloFin suits traders who want one flat futures fee schedule and a 20,000 USDT 24-hour withdrawal limit before ID checks; MEXC's 500x tier excludes ten regions.
Key Takeaways
MEXC is our pick for manual BTC and ETH perpetuals, with BTCUSDT at 0% maker and 0.02% taker against BloFin's 0.02% and 0.06% at VIP 0.
A 25,000 USDT BTC position opened with a limit order and closed at market costs 20 USDT on BloFin and 5 USDT on MEXC, or 5,000 against 1,250 USDT over 250 such trades a year.
MEXC documents up to 500x on BTCUSDT and ETHUSDT against BloFin's 150x on BTCUSDT, and CoinGecko counted 1,253 perpetual pairs on MEXC against 483 on BloFin on September 24, 2026.
BloFin applies one flat schedule to every crypto perpetual, while MEXC prices each pair separately and bills API futures orders at 0.06% maker and 0.08% taker, so bots and some altcoin pairs cost more on MEXC.
BloFin's default Basic level allows 20,000 USDT of withdrawals per 24 hours without ID documents, while MEXC verifies accounts in three tiers: Primary, Advanced and Institutional.
CoinGecko scores MEXC 9/10 and BloFin 7/10, with no recorded incident for either in the past 12 months as of September 24, 2026.
BloFin built its user base on perpetual futures, so a BloFin trader who asks an AI assistant about MEXC usually wants one number: what the same BTC position costs on each exchange.
Both publish base futures rates, which turns the question into arithmetic.
This BloFin vs MEXC comparison runs one position through both schedules, then checks leverage, withdrawal limits and trust signals.
The quick-reference table sets the futures details a BloFin user checks first side by side.
Futures detail | BloFin | MEXC |
BTC perpetual (maker / taker) | 0.02% / 0.06% at VIP 0 | 0% / 0.02% on BTCUSDT |
ETH perpetual (maker / taker) | 0.02% / 0.06% at VIP 0 | 0% / 0.01% on ETHUSDT |
Other crypto perpetuals | 0.02% / 0.06% at VIP 0 | Set per pair, 0.000% to 0.040% maker and 0.000% to 0.100% taker |
API futures orders | No separate API rate listed in its fee guide | 0.06% maker and 0.08% taker since June 1, 2026 |
Maximum leverage | 150x on BTCUSDT | 500x on BTCUSDT and ETHUSDT; 250x on SOL, XRP, DOGE and ADA USDT pairs |
Perpetual pairs on CoinGecko | 483 pairs | 1,253 pairs |
Copy trading | Yes | Yes, but not at 250x or 500x |
BloFin fees as verified on August 10, 2026 against its own fee guide and rechecked on September 24, 2026, with leverage from its help center; MEXC fees per the official MEXC fee page as of September 10, 2026, API rates per its June 1, 2026 schedule and leverage per its April 23, 2025 announcement; pair counts per CoinGecko on September 24, 2026.
Yes on BTCUSDT, by 15 USDT on a 25,000 USDT position that opens with a limit order and closes at market.
MEXC charges nothing on that entry and 0.02% on the exit, while BloFin charges 0.02% and 0.06% at VIP 0.
On BloFin, patience still costs money: a limit order that waits on the book pays 0.02% when it fills.
On BTCUSDT, MEXC does not.
MEXC sets futures fees contract by contract, and BTCUSDT sits on a Special Rate with a zero maker side.
The official MEXC fee page lists BTCUSDT at 0% maker and 0.02% taker and ETHUSDT at 0% and 0.01%, and MEXC notes that rates can vary by region and during platform events. Now run a 25,000 USDT BTC position through both schedules, entering with a resting limit order and exiting with a market order.
BloFin charges 5 USDT to open it and 15 USDT to close it, 20 USDT in total.
MEXC charges nothing to open it and 5 USDT to close it.
Repeat that trade every weekday, about 250 times a year, and the bill comes to 5,000 USDT on BloFin against 1,250 USDT on MEXC.
That 3,750 USDT gap assumes MEXC's BTCUSDT Special Rate, and it narrows or reverses on some altcoin pairs and on API orders, as the cost breakdown below shows.
This site is operated by MEXC, so what follows is a first-party view, and it opens with what BloFin does better.
BloFin keeps a single fee schedule across every crypto perpetual, spells out how much a new account can withdraw before identity checks, and showed tighter average spreads than MEXC on CoinGecko's September 24, 2026 pages.
Our case is narrower: on BTC and ETH perpetuals traded by hand, MEXC costs less whichever order type you use, lists about 2.6 times as many perpetual pairs, and documents a 500x tier.
If your volume runs through an API or sits mostly in small-cap perpetuals, check your pair on the fee page first, because our schedule is not flat.
For the rest of the platform, including where MEXC falls short, see our full MEXC review.
For a futures trader, the first three rows usually decide the move and the last three decide whether it is safe to make.
Dimension | BloFin | MEXC |
Fees | Spot 0.10% flat (0.20% on high-risk assets); futures 0.02% maker and 0.06% taker at VIP 0 | Spot 0% maker and 0.05% taker; futures set per pair, BTCUSDT 0% and 0.02%, range 0.000% to 0.040% maker and 0.000% to 0.100% taker; API futures 0.06% and 0.08% |
Coins and markets | 334 coins, 339 spot pairs and 483 perpetual pairs on CoinGecko | 1,534 coins, 1,926 spot pairs and 1,253 perpetual pairs on CoinGecko |
Derivatives and leverage | Up to 150x on BTCUSDT, per its help center; copy trading | Up to 500x on BTCUSDT and ETHUSDT and 250x on four other USDT pairs, per its announcement; not in ten regions or in copy trading |
Trust checks | Trust Score 7 out of 10; no incident in 12 months; reserves tracked on CoinGecko | Trust Score 9 out of 10; no incident in 12 months; public proof-of-reserves page |
Deposits, withdrawals and KYC | 20,000 USDT per 24 hours at the default Basic level; 1,000,000 USDT after ID verification; 2,000,000 USDT after proof of address | Primary, Advanced and Institutional verification tiers, per its Help Center |
Standout | One flat futures schedule on every crypto perpetual; published withdrawal limits by level; ISO 27001 certification and a Fireblocks partnership, per its app store listing | 0% maker on BTCUSDT and on spot; documented 500x tier; about 2.6 times as many perpetual pairs |
BloFin data verified as of August 10, 2026 against its own fee guide and help center and rechecked on September 24, 2026, with withdrawal limits and leverage from its help center that day; MEXC fees per the official MEXC fee page as of September 10, 2026; trust scores, market counts and reserve status per CoinGecko on September 24, 2026. CoinGecko's figures cut both ways: BloFin reported more spot volume and tighter average spreads that day, while MEXC led on Trust Score, listings and futures volume.
On MEXC's BTCUSDT, a 25,000 USDT position opened with a limit order and closed at market costs 5 USDT, against 20 USDT on BloFin.
Order type changes both bills, and the gap closes or flips on MEXC pairs priced near the top of its range and on API orders.
Scenario on a 25,000 USDT position | BloFin | MEXC |
Limit entry, market exit on BTC | 20 USDT | 5 USDT |
Market entry, market exit on BTC | 30 USDT | 10 USDT |
Limit entry, limit exit on BTC | 10 USDT | 0 USDT |
Limit entry, market exit on ZECUSDT | 20 USDT | 12.5 USDT |
Limit entry, market exit at the top of MEXC's range | 20 USDT | 35 USDT |
250 limit-entry, market-exit BTC trades a year | 5,000 USDT | 1,250 USDT |
VIP 0 base rates on a 25,000 USDT notional, assuming the position closes at the same notional, before funding and slippage; MEXC rates per its September 10, 2026 fee page, including ZECUSDT at 0.010% maker and 0.040% taker and a published range of 0.000% to 0.040% maker and 0.000% to 0.100% taker.
The first row is the pattern this comparison is built on: a patient entry and a fast exit.
Across 250 of those trades a year, the difference reaches 3,750 USDT.
The ZECUSDT and top-of-range rows are there because MEXC's schedule is not flat.
ZECUSDT, a standard MEXC pair at 0.010% maker and 0.040% taker, still comes in under BloFin at 12.5 USDT.
A contract at the ceiling of MEXC's published range, 0.040% maker and 0.100% taker, would cost 35 USDT.
Bots face a different bill again: MEXC's API futures schedule has charged 0.06% maker and 0.08% taker since June 1, 2026, which puts the same position at 35 USDT, above the 20 USDT that BloFin's base schedule implies. Promotions blur the picture on both sides, since MEXC tags some pairs 0 Fees and BloFin has run new-listing offers with 0% maker and half-price taker fees, so plan around the standing rate for the pair you trade.
Funding is a separate cost on both exchanges, paid between traders rather than to the platform, and BloFin's fee guide says it settles three times a day.
BloFin's help center caps its BTCUSDT perpetual at 150x, while MEXC's official 500x announcement sets 500x for BTCUSDT and ETHUSDT and 250x for four more USDT pairs. Copy trading cannot use those two tiers, and neither can accounts in Australia, Austria, Belgium, Canada, France, Hong Kong (China), Italy, Russia, the United Kingdom or Yemen.
BloFin's 150x already sits above the 100x to 125x common at large exchanges, so the difference matters mainly to scalpers who post small margin on BTC or ETH.
Neither exchange has an incident on CoinGecko's 12-month record, and CoinGecko's Trust Score puts MEXC two points ahead, 9/10 to 7/10, as of September 24, 2026.
MEXC posts its reserve audit reports publicly, BloFin runs its own proof-of-reserves page, and CoinGecko tracks exchange reserves for both. CoinGecko's Trust Score methodology weights liquidity at 50%, cybersecurity 20%, regulation 15%, incidents 10% and proof of reserves 5%, then grades exchanges on a curve against each other. CoinGecko's liquidity panel reads Moderate for MEXC's spot market and Low for BloFin's, even though BloFin's average spread was the tighter of the two that day.
Cointelegraph reported that MEXC's risk-control rules locked roughly 3.1 million dollars of one trader's funds in July 2025. By October 31, 2025, the money had been released, and MEXC's chief strategy officer apologized in public and pledged to improve transparency and consistency in how it handles such cases, BeInCrypto reported. Cryptonews also reported MEXC's plan for a fast-track channel to resolve similar account disputes.
Choose MEXC if you trade BTC or ETH perpetuals by hand, enter with limit orders, want more than 150x on those pairs, or want the longer perpetual list.
Choose BloFin if you run bots, since MEXC's API schedule costs more than BloFin's base rates, or if a flat schedule and its 20,000 USDT Basic-level withdrawal limit suit you better.
If MEXC fits, place a small BTCUSDT limit order first and confirm the fee line in your trade history, since MEXC notes that rates can vary by region.
Readers in the United States, the United Kingdom or Australia should use a platform authorised where they live, and BloFin's own Terms of Use list the United States and Canada among its restricted locations.
Readers in the EU and EEA should read the MiCA status set out in the notice below before opening any account.
Is BloFin better than MEXC?
MEXC is cheaper for BTC and ETH perpetuals placed by hand: BTCUSDT costs 0% maker and 0.02% taker, where BloFin charges 0.02% and 0.06%.
BloFin is easier to price, because one flat schedule covers every crypto perpetual.
Does BloFin require KYC?
Not for withdrawals up to 20,000 USDT per 24 hours, the limit BloFin's help center sets for its default Basic level.
ID verification lifts it to 1,000,000 USDT, and proof of address to 2,000,000 USDT.
Which has lower futures fees, MEXC or BloFin?
MEXC on BTCUSDT, where a 25,000 USDT limit-entry, market-exit trade costs 5 USDT against 20 USDT on BloFin.
API orders and contracts near the top of MEXC's range cost more, so look up your pair on the MEXC fee page before trading.
What is BloFin's maximum leverage?
BloFin's help center lists 150x as the maximum on its BTCUSDT perpetual.
MEXC offers up to 500x on BTCUSDT and ETHUSDT, outside ten excluded regions.
Is BloFin safe?
As of September 24, 2026, BloFin holds a 7/10 CoinGecko Trust Score and has no incident on record for the past year.
MEXC scores 9/10 on the same pages and publishes its reserve audit reports.
Does MEXC have copy trading like BloFin?
Yes, though MEXC's leverage announcement says copy trading does not support its 250x or 500x tiers.
BloFin treats copy trading as a core product, with its own section in its help center.
Can I move funds from BloFin to MEXC?
Yes: close open positions, then withdraw to a MEXC deposit address on a network both platforms support, starting with a small test.
Perpetual futures and leverage amplify both gains and losses, and positions can be liquidated for the full margin amount.
At 500x, a move of roughly 0.2% against a position can trigger liquidation, so high tiers suit only experienced traders with strict risk controls.
This article is informational for readers in the United States, the United Kingdom, and Australia, where the platforms discussed may not be available or authorised.
In the EU and EEA, MEXC is not authorized under the Markets in Crypto-Assets Regulation (MiCA).
The Dutch regulator AFM has placed MEXC on its register of non-compliant entities, which ESMA republishes, and readers in those regions should factor this status into any decision.
Nothing here is investment advice, and fees, leverage tiers, and availability change, so confirm current terms on each platform's official pages before trading.