Litecoin (LTC) is currently moving from a bearish to bullish setup as overall conditions in the crypto market are favoring the bulls. However, the crypto analystLitecoin (LTC) is currently moving from a bearish to bullish setup as overall conditions in the crypto market are favoring the bulls. However, the crypto analyst
Litecoin (LTC) Technical Outlook: Holding $79.60 Could Spark $250-$300 Rally
Litecoin (LTC) is currently moving from a bearish to bullish setup as overall conditions in the crypto market are favoring the bulls. However, the crypto analyst, Crypto Patel, pointed out that the year 2025 has turned out to be incredible for precious metals, as real silver has demonstrated an incredible +180% YTD gain.
Conversely, its digital equivalent, Litecoin (LTC), has been rather disappointing, plunging -44% YTD. The difference between real and digital silver becomes so large that it is only a matter of time before it corrects itself, as has always been the case in the past.
Source: Crypto Patel
Analysts state that if the transition from physical silver to digital silver is set to happen in 2026, it is possible that Litecoin may set its sights on reaching $250-$300, which falls very much within the theme that is associated with the idea that it is digital silver. It is obvious that the problem that must now be overcome by LTC is that it has to prove that it is something that is far more than simply an altcoin.
Also Read: Litecoin (LTC) Holds $78 While Market Eyes $80 Breakout and Potential Gains
Litecoin Holds Key Levels and Set Sights on $96
Moreover, another crypto analyst, CRYPTOWZRD, highlighted that Litecoin closed slightly bullish as it moved higher and suggested a breakout. Analysts are closely observing intraday charts because a major factor influencing future performance relies on Bitcoin’s dominance. There are chances of further increases, while there could be a consolidation phase if there’s no clarity on Bitcoin’s dominance.
Source: CRYPTOWZRD
The present support for LTC is $79.60. The break above this point would be supportive of the bulls and might attract more purchasing and potentially push the price toward $96, whereas a rejection would continue the sideways trend. Traders should observe volumes and daily chart movements to forecast whether LTC would continue on the uptrend or have a pause.
Technicals Hint at Building Momentum, but Caution Remains
From the technical perspective, Litecoin (LTC) is currently trading around $79.29, following a strong bullish move from the $75 region towards almost $80 in the past few days. Looking at the 4-hour chart, the buying is strong and steady, although the last few candles do indicate a small consolidation just below the major $80 level.
Source: TradingView
From a technical analysis perspective, there are indications of a bullish scenario. The fact that the Bollinger Band Percent is at 2.36 indicates that the price is close to the upper band, which is an indication of a possible short-term period of consolidation.
On the other hand, the RSI value of 59.65 indicates moderate bullish momentum. It is recommended to keep track of the price to see whether there will be a breakout at $80 to resume the bullish trend or a pullback at $77 to $78.
Also Read: Litecoin Price Surge Ahead? LTC Poised for $96.78 Breakout
Market Opportunity
Litecoin Price(LTC)
$52.5
$52.5$52.5
USD
Litecoin (LTC) Live Price Chart
Disclaimer: The articles reposted on this site are sourced from public platforms and are provided for informational purposes only. They do not necessarily reflect the views of MEXC. All rights remain with the original authors. If you believe any content infringes on third-party rights, please contact service@support.mexc.com for removal. MEXC makes no guarantees regarding the accuracy, completeness, or timeliness of the content and is not responsible for any actions taken based on the information provided. The content does not constitute financial, legal, or other professional advice, nor should it be considered a recommendation or endorsement by MEXC.
You May Also Like
SM Offices investing P1B in Cebu expansion
SM OFFICES, the commercial property arm of SM Prime Holdings, Inc., plans to add more than 60,000 square meters (sq.m.) of new leasable space worth about P1 billion
Share
Bworldonline2026/02/20 00:06
Summarize Any Stock’s Earnings Call in Seconds Using FMP API
Turn lengthy earnings call transcripts into one-page insights using the Financial Modeling Prep APIPhoto by Bich Tran
Earnings calls are packed with insights. They tell you how a company performed, what management expects in the future, and what analysts are worried about. The challenge is that these transcripts often stretch across dozens of pages, making it tough to separate the key takeaways from the noise.
With the right tools, you don’t need to spend hours reading every line. By combining the Financial Modeling Prep (FMP) API with Groq’s lightning-fast LLMs, you can transform any earnings call into a concise summary in seconds. The FMP API provides reliable access to complete transcripts, while Groq handles the heavy lifting of distilling them into clear, actionable highlights.
In this article, we’ll build a Python workflow that brings these two together. You’ll see how to fetch transcripts for any stock, prepare the text, and instantly generate a one-page summary. Whether you’re tracking Apple, NVIDIA, or your favorite growth stock, the process works the same — fast, accurate, and ready whenever you are.
Fetching Earnings Transcripts with FMP API
The first step is to pull the raw transcript data. FMP makes this simple with dedicated endpoints for earnings calls. If you want the latest transcripts across the market, you can use the stable endpoint /stable/earning-call-transcript-latest. For a specific stock, the v3 endpoint lets you request transcripts by symbol, quarter, and year using the pattern:
https://financialmodelingprep.com/api/v3/earning_call_transcript/{symbol}?quarter={q}&year={y}&apikey=YOUR_API_KEY
here’s how you can fetch NVIDIA’s transcript for a given quarter:
import requestsAPI_KEY = "your_api_key"symbol = "NVDA"quarter = 2year = 2024url = f"https://financialmodelingprep.com/api/v3/earning_call_transcript/{symbol}?quarter={quarter}&year={year}&apikey={API_KEY}"response = requests.get(url)data = response.json()# Inspect the keysprint(data.keys())# Access transcript contentif "content" in data[0]: transcript_text = data[0]["content"] print(transcript_text[:500]) # preview first 500 characters
The response typically includes details like the company symbol, quarter, year, and the full transcript text. If you aren’t sure which quarter to query, the “latest transcripts” endpoint is the quickest way to always stay up to date.
Cleaning and Preparing Transcript Data
Raw transcripts from the API often include long paragraphs, speaker tags, and formatting artifacts. Before sending them to an LLM, it helps to organize the text into a cleaner structure. Most transcripts follow a pattern: prepared remarks from executives first, followed by a Q&A session with analysts. Separating these sections gives better control when prompting the model.
In Python, you can parse the transcript and strip out unnecessary characters. A simple way is to split by markers such as “Operator” or “Question-and-Answer.” Once separated, you can create two blocks — Prepared Remarks and Q&A — that will later be summarized independently. This ensures the model handles each section within context and avoids missing important details.
Here’s a small example of how you might start preparing the data:
import re# Example: using the transcript_text we fetched earliertext = transcript_text# Remove extra spaces and line breaksclean_text = re.sub(r'\s+', ' ', text).strip()# Split sections (this is a heuristic; real-world transcripts vary slightly)if "Question-and-Answer" in clean_text: prepared, qna = clean_text.split("Question-and-Answer", 1)else: prepared, qna = clean_text, ""print("Prepared Remarks Preview:\n", prepared[:500])print("\nQ&A Preview:\n", qna[:500])
With the transcript cleaned and divided, you’re ready to feed it into Groq’s LLM. Chunking may be necessary if the text is very long. A good approach is to break it into segments of a few thousand tokens, summarize each part, and then merge the summaries in a final pass.
Summarizing with Groq LLM
Now that the transcript is clean and split into Prepared Remarks and Q&A, we’ll use Groq to generate a crisp one-pager. The idea is simple: summarize each section separately (for focus and accuracy), then synthesize a final brief.
Prompt design (concise and factual)
Use a short, repeatable template that pushes for neutral, investor-ready language:
You are an equity research analyst. Summarize the following earnings call sectionfor {symbol} ({quarter} {year}). Be factual and concise.Return:1) TL;DR (3–5 bullets)2) Results vs. guidance (what improved/worsened)3) Forward outlook (specific statements)4) Risks / watch-outs5) Q&A takeaways (if present)Text:<<<{section_text}>>>
Python: calling Groq and getting a clean summary
Groq provides an OpenAI-compatible API. Set your GROQ_API_KEY and pick a fast, high-quality model (e.g., a Llama-3.1 70B variant). We’ll write a helper to summarize any text block, then run it for both sections and merge.
import osimport textwrapimport requestsGROQ_API_KEY = os.environ.get("GROQ_API_KEY") or "your_groq_api_key"GROQ_BASE_URL = "https://api.groq.com/openai/v1" # OpenAI-compatibleMODEL = "llama-3.1-70b" # choose your preferred Groq modeldef call_groq(prompt, temperature=0.2, max_tokens=1200): url = f"{GROQ_BASE_URL}/chat/completions" headers = { "Authorization": f"Bearer {GROQ_API_KEY}", "Content-Type": "application/json", } payload = { "model": MODEL, "messages": [ {"role": "system", "content": "You are a precise, neutral equity research analyst."}, {"role": "user", "content": prompt}, ], "temperature": temperature, "max_tokens": max_tokens, } r = requests.post(url, headers=headers, json=payload, timeout=60) r.raise_for_status() return r.json()["choices"][0]["message"]["content"].strip()def build_prompt(section_text, symbol, quarter, year): template = """ You are an equity research analyst. Summarize the following earnings call section for {symbol} ({quarter} {year}). Be factual and concise. Return: 1) TL;DR (3–5 bullets) 2) Results vs. guidance (what improved/worsened) 3) Forward outlook (specific statements) 4) Risks / watch-outs 5) Q&A takeaways (if present) Text: <<< {section_text} >>> """ return textwrap.dedent(template).format( symbol=symbol, quarter=quarter, year=year, section_text=section_text )def summarize_section(section_text, symbol="NVDA", quarter="Q2", year="2024"): if not section_text or section_text.strip() == "": return "(No content found for this section.)" prompt = build_prompt(section_text, symbol, quarter, year) return call_groq(prompt)# Example usage with the cleaned splits from Section 3prepared_summary = summarize_section(prepared, symbol="NVDA", quarter="Q2", year="2024")qna_summary = summarize_section(qna, symbol="NVDA", quarter="Q2", year="2024")final_one_pager = f"""# {symbol} Earnings One-Pager — {quarter} {year}## Prepared Remarks — Key Points{prepared_summary}## Q&A Highlights{qna_summary}""".strip()print(final_one_pager[:1200]) # preview
Tips that keep quality high:
Keep temperature low (≈0.2) for factual tone.
If a section is extremely long, chunk at ~5–8k tokens, summarize each chunk with the same prompt, then ask the model to merge chunk summaries into one section summary before producing the final one-pager.
If you also fetched headline numbers (EPS/revenue, guidance) earlier, prepend them to the prompt as brief context to help the model anchor on the right outcomes.
Building the End-to-End Pipeline
At this point, we have all the building blocks: the FMP API to fetch transcripts, a cleaning step to structure the data, and Groq LLM to generate concise summaries. The final step is to connect everything into a single workflow that can take any ticker and return a one-page earnings call summary.
The flow looks like this:
Input a stock ticker (for example, NVDA).
Use FMP to fetch the latest transcript.
Clean and split the text into Prepared Remarks and Q&A.
Send each section to Groq for summarization.
Merge the outputs into a neatly formatted earnings one-pager.
Here’s how it comes together in Python:
def summarize_earnings_call(symbol, quarter, year, api_key, groq_key): # Step 1: Fetch transcript from FMP url = f"https://financialmodelingprep.com/api/v3/earning_call_transcript/{symbol}?quarter={quarter}&year={year}&apikey={api_key}" resp = requests.get(url) resp.raise_for_status() data = resp.json() if not data or "content" not in data[0]: return f"No transcript found for {symbol} {quarter} {year}" text = data[0]["content"] # Step 2: Clean and split clean_text = re.sub(r'\s+', ' ', text).strip() if "Question-and-Answer" in clean_text: prepared, qna = clean_text.split("Question-and-Answer", 1) else: prepared, qna = clean_text, "" # Step 3: Summarize with Groq prepared_summary = summarize_section(prepared, symbol, quarter, year) qna_summary = summarize_section(qna, symbol, quarter, year) # Step 4: Merge into final one-pager return f"""# {symbol} Earnings One-Pager — {quarter} {year}## Prepared Remarks{prepared_summary}## Q&A Highlights{qna_summary}""".strip()# Example runprint(summarize_earnings_call("NVDA", 2, 2024, API_KEY, GROQ_API_KEY))
With this setup, generating a summary becomes as simple as calling one function with a ticker and date. You can run it inside a notebook, integrate it into a research workflow, or even schedule it to trigger after each new earnings release.
Free Stock Market API and Financial Statements API...
Conclusion
Earnings calls no longer need to feel overwhelming. With the Financial Modeling Prep API, you can instantly access any company’s transcript, and with Groq LLM, you can turn that raw text into a sharp, actionable summary in seconds. This pipeline saves hours of reading and ensures you never miss the key results, guidance, or risks hidden in lengthy remarks. Whether you track tech giants like NVIDIA or smaller growth stocks, the process is the same — fast, reliable, and powered by the flexibility of FMP’s data.
Summarize Any Stock’s Earnings Call in Seconds Using FMP API was originally published in Coinmonks on Medium, where people are continuing the conversation by highlighting and responding to this story
Share
Medium2025/09/18 14:40
Meme Coin Frenzy Cools, Altcoins Take the Spotlight
Pump.fun’s flagship coin PUMP dropped nearly 10% in a single day, dragging down related tokens such as TROLL and Aura, […] The post Meme Coin Frenzy Cools, Altcoins Take the Spotlight appeared first on Coindoo.
Share
Coindoo2025/09/20 00:00